Solar cable; 1X10; black; U0/U: 1 /1 kV; Cross-linked polyethylene; Fixed Installation; HalogenfreeCopied to clipboard
Add to product comparison
- Extended warranty of 5 years.
- Halogen-free core insulation and sheath compound to comply with special fire safety requirements.
- Classified fire properties in accordance with EU Directive 305/2011 (BauPVO/CPR) for articles with a conductor cross-section of 4 mm², 6 mm² and 10 mm².
- A laterally waterproof cable allows permanent submersion in shallow, uncontaminated water: AD8 in accordance with IEC 60364-5-51 and IEC 62440.
- Due to its increased mechanical strength, it is suitable for underground installation in a cable trench with a sand bed, tested using the "Impact-Resistance Test" and the "Crushing-Resistance Test" in accordance with UL 854.
- Cross-linked insulation and sheathing materials promote longevity at high temperatures or at high current loads, and ensure a high dielectric strength and a high short circuit temperature.
- IEC certification allows international use of the product in countries in which the IEC standards are applicable.
- Expected service life of 25 years in accordance with EN 50618 for H1Z2Z2-K-compliant application.
- Available in three different outer sheath colours so that the DC conductor can be identified externally.
- For unprotected connection of solar modules and inverters in earthed and non-earthed photovoltaic systems according to EN 50618.
- For interconnecting solar modules.
- For direct current applications up to 1.8 kV.
- For use with the solar connectors of the EPIC® SOLAR series.
- For fixed installation and occasional movement, if necessary freely hanging.
- Underground installation in protective conduits according to IEC 60364-5-52.
- Underground installation in a cable trench with a sand bed based on VDE 0891-6 and DIN EN 50174-3.
- Can be installed in closed installation ducts, under plaster and in devices.