Canada
 
en_CA
fr_CA
 
0
0
0
Canada
 
en_CA
fr_CA
 

Product Certification and Compliance

Certifications and Environmental Compliance


C UL US

Underwriters Laboratories
Continue

CSA

Canadian Standards Association
Continue

C RU US

Recognized Component Mark
Continue

NFPA

National Fire Protection Association
Continue

CE Marking

Go to CE marking and logo use information site
Continue

UKCA Logo & Marking

Go to more information on UKCA logo & marking. 
Continue

VDE

Get More Information on VDE Recognized Component Mark
Continue

DNV

Det Norske Veritas (DNV)
Continue

CENELEC HAR

CENELEC HAR European Committee for Electrotechnical Standardization
Continue

Quality and Environment (REACH, ROHS, California Prop 65)


At LAPP, we strive to meet 100% of our customer requirements and deliver quality products on time through continuous improvement of our processes and procedures.  We monitor our processes and validate results using metrics to drive our continued success with emphasis on customer satisfaction. We train and reinforce the effectiveness of our employees and provide team with state-of-the-art equipment and materials.  We deploy and communicate our quality policies and practices to our internal and external customers throughout all business activities.

Customer Driven Quality

  • We are committed to meet 100% of our customer requirements and deliver quality products on time, through continuous improvement of our processes and procedures. Our customers depend on the quality, safety, and reliability of our products. Our success is measured by our customer's satisfaction.  

Continuous Improvement

  • Continuous Improvement in all of our operations and activities is at the center of our Quality Management System. In the spirit of our QMS EMS, we adopted a broader integrated quality/environmental management system that focuses on our internal processes, but also use methods to collect valuable customer feedback.

Setting New Standards

  • Our dedication to quality is illustrated by our recent achievement of UL Certification, which granted authorization to perform tests in full compliance with UL standards, but also Quality Validation and New Product Innovation. At our state-of-the-art laboratory, we can perform air oven aging, oil resistance, cold temperature, cold impact, and many other mechanical, electrical and environmental testing that go above and beyond regulatory standards.

Your Partner in the Industry

  • Quality goes beyond inspection and compliance, is our philosophy.  For this is the reason you can trust our well-trained team of experts to offer excellent, local pre- and post-sales support. We also have an extensive network of Value-Added Resellers and Distributors throughout the North American Region. LAPP employees and partners are committed to the quality management principles that ensure customer satisfaction and a continued partnership of success.

Environmental Regulations


RoHS & REACH Designation

Component products included in Lapp catalogs follow 1) the ROHS Directive as well as 2) the following list of Substances of Very High Concern (SVHC) in accordance with European Regulation Number 1907/2006.  Cable assembly products and custom made items require separate certification.

RoHS & WEEE Directives


RoHS (2011/65/EU)(Restriction of Hazardous Substances)

Requires that manufacturers, distributors and sellers comply with eliminating certain hazardous substances from New Electrical and Electrical equipment by July 1, 2006.

These substances are:

  • Lead
  • Mercury
  • Cadmium
  • DECA-BDE
  • Hexavalent chromium
  • Polybrominated biphenyl (PBB)
  • Polybrominated diphenylether (PBDE)

In certain substances, limited values or exceptions apply, which are specified in EU Guidelines 2002/95/EC.

The importance of eliminating lead from cables began in the European and Asian markets.

International Regulations & Directives are in the process of eliminating lead.

All standard LAPP cables are manufactured with compounds that meet the RoHS directive. These cables will be identified by the designation "RoHS" on the jacket print legend.

WEEE (2012/19/EU)

Waste Electronic and Electrical Equipment - requires that manufacturers, distributors and sellers of specific appliances, and electrical equipment provide recycling and disposal facilities for their products as of August 13, 2005.

The use of non-lead compounds will not compromise the integrity of any LAPP product's ability to provide continued optimum performance.

REACH Regulation (EC) No 1907/2006 concerning Registration, Evaluation, Authorization and Restriction of Chemicals


On June 1, 2007 REACH came into force. It contains the following regulations:

1. From June 1, 2008, manufacturers of substances, and importers of substances as such or of substances in preparations (mixtures) into the European Community (EC) and the European Economic Area (EEA), must register these substances with the European Chemicals Agency if the substances in question are manufactured or imported in quantities of at least 1 t/a and if they are not substances that are exempted from compulsory registration. So-called "phase-in substances" – these are, for example, substances that are shown on the existing substances list EINECS – can be pre-registered between 1 June 2008 and 1 December 2008. Pre-registered substances do not have to be registered until later, depending on the quantity manufactured/imported.

2. Suppliers of substances and preparations must provide the recipient with either a safety data sheet (Article 31) or safety information (Article 32). In certain cases, the safety data sheet will be supplemented by an annex ("extended safety data sheet") showing the relevant exposure scenarios.

3. Manufacturers and importers of articles that contain more than 0.1 mass percent per article of a substance on the "candidate list" shall provide the professional recipient and on request a consumer of the article with sufficient information to allow safe use of the article, including, as a minimum, the name of that substance. If all these articles contain more than 1 t/a a notification to the European Chemicals Agency (EChA) is necessary, however, not before 1 June 2011.

4. From June 1, 2008, users of chemicals (substances and preparations/mixtures) – so-called "downstream users" – will have to comply with other obligations, but in some cases only after they have received an extended safety data sheet. Downstream users can provide appropriate information so as to assist the manufacturers of substances and importers of substances and preparations in registering them. You procure articles (not chemicals) from us which are not intended to release any substance under normal and reasonably foreseeable conditions of use. Consequently, the obligations in No. 1 and 2 above are not relevant here.

Upon EChA’s publishing or updating of the "candidate list", we shall fulfill our obligations according to No.

5. We shall send you any necessary information once the relevant data is available from the supply chain.

Through communication with our chemicals suppliers we will try to safeguard the delivery of all chemicals which are necessary for us.

As far as REACH causes relevant modifications of products, affects our ability to deliver, or has an impact on the quality of our products, we will keep you informed within the scope of our business relationship. In individual cases we will consult you about appropriate actions. 

LAPP Response: Items purchased from Lapp are articles/finished goods not chemicals, which are not intended to release any substance under normal and reasonably foreseeable conditions of use. Further, LAPP is neither manufacturer nor importer of substances or preparations. Therefore LAPP cannot act as a registrant.

LAPP has always shown responsibility and care to promote secure and environmentally friendly products. It is our aim to substitute substances of very high concern, or SVHC (in the sense of REACH) with substances which are safe to use, do not represent health hazards and minimize the environmental impact. To this end, we closely monitor the "candidate list", in which SVHC are listed.

Based on candidate list dated June 14, 2023 component products from LAPP, with some exceptions, comply with all authorization obligations in accordance to REACH Annex XIV, as well as all restrictions on manufacturing, marketing and use of substances, as defined in Annex XVII of REACH. Cable assembly and custom items need to be confirmed separately regarding compliance with REACH Annex XIV and Annex XVII.

In addition, all component products from LAPP meet the RoHS Directive. Cable assembly and custom items need to be confirmed separately regarding compliance with each directive. For specific part number inquiries, please contact us.

 

For additional information or compliance documentation please contact sales.us.lus@lapp.com

California Proposition 65


Dear Valued Customer,

In 1986, California voters approved an initiative to address their growing concerns about exposure to toxic chemicals. That initiative became the Safe Drinking Water and Toxic Enforcement Act of 1986, better known by its original name of Proposition 65. Proposition 65 requires the State to publish a list of chemicals known to cause cancer or birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include more than 900 chemicals since it was first published in 1987.

Proposition 65 requires businesses to notify Californians about significant amounts of chemicals in the products they purchase, in their homes or workplaces, or that are released into the environment. By providing this information, Proposition 65 enables Californians to make informed decisions about protecting themselves from exposure to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water.

Infrequently handled cords are exempt, based on the Proposition 65 wire and cable settlement taking the form of a Consent Judgment submitted to the court in San Francisco. It was agreed that Cords and Covered Products, which because of their size, weight or function, are infrequently handled (such as upon their installation in a setting where they are not typically plugged and unplugged). A list of over 200 of these types of infrequently handled products was created in Exhibit F of the Settlement Agreement. Some examples of infrequently handled cords: building wire, printer cables, riser/plenum cable, speaker wire, telecom data cable, telecom power cable, telephone power and data cords, thermostat cable, utility cable, signal cable, power control/ instrumentation/ cable, utility wire and cable, etc. Also exempt: cords that are internal components not normally accessible to consumer during ordinary use.

LAPP products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. However as they do meet exempt criteria, are therefore deemed exempt from the above mentioned referendum.