United Kingdom
 
 
£
€
  • Products
  • Industries
  • Solutions
  • Service
  • News
  • Company
  • Products
  • Industries
  • Solutions
  • Service
  • News
  • Company
United Kingdom
 
 
£
€

Cables/wires for robots and torsion

For dynamic bending and torsional stress in industrial robots

With these power and control cables, your gantry robots and articulated robots are perfectly equipped for impressive performance. They are designed for simultaneous bending and twisting with torsion angles of up to +/- 360°. The cables are available in screened and unscreened variants and optionally with UL/CSA certification for North America.

Categories

Cables
Power and control cables
Show all
Robots and torsion

Filter

Reset everything
Filter

Filter

Reset everything
  • General information
    • Product type
      • Robotic cable
  • Electrical parameters
    • Nominal voltage
      • U0/U: 300/500 V AC rms according to IEC
      • 48 V AC rms according to IEC
    • Rated voltage
      • 600 V AC rms according to UL AWM
      • 600 V AC rms according to cRU AWM
      • 1000 V AC rms according to UL AWM
      • 1000 V AC rms according to cRU AWM
    • Test voltage
      • 3 kV
      • 1.5 kV
      • 2 kV
  • Product design
    • Conductor cross-section (mm2)
      • 1.0 mm²
      • 0.34 mm²
      • 1.5 mm²
      • 0.25 mm²
      • 2.5 mm²
      • 0.5 mm²
      • 0.14 mm²
      • 0.75 mm²
      • 6.0 mm²
      • 16.0 mm²
      • 25.0 mm²
      • 35.0 mm²
    • Nominal cross section conductor (AWG)
      • 10 AWG
      • 14 AWG
      • 16 AWG
      • 18 AWG
      • 21 AWG
      • 22 AWG
      • 24 AWG
    • Including protective conductor
      • Yes
      • No
    • Number of cores
      • 4.0
      • 25.0
      • 3.0
      • 18.0
      • 12.0
      • 2.0
      • 7.0
      • 14.0
      • 16.0
      • 23.0
      • 34.0
      • 41.0
      • 5.0
    • Shielded
      • No
      • Yes
    • Nominal outer diameter
      • 6.2 mm
      • 6.6 mm
      • 9.1 mm
      • 11.2 mm
      • 5.2 mm
      • 6.7 mm
      • 9.3 mm
      • 10.2 mm
      • 13.2 mm
      • 13.3 mm
      • 15.4 mm
      • 4.6 mm
      • 4.8 mm
      • 5.0 mm
      • 5.4 mm
      • 5.7 mm
      • 6.3 mm
      • 6.5 mm
      • 7.0 mm
      • 7.2 mm
      • 8.0 mm
      • 8.2 mm
      • 8.8 mm
      • 9.0 mm
      • 9.2 mm
      • 9.4 mm
      • 10.1 mm
      • 10.3 mm
      • 10.5 mm
      • 10.6 mm
      • 11.0 mm
      • 11.1 mm
      • 11.5 mm
      • 12.0 mm
      • 12.3 mm
      • 12.4 mm
      • 12.5 mm
      • 13.1 mm
      • 13.8 mm
      • 14.0 mm
      • 14.3 mm
      • 15.2 mm
      • 15.8 mm
      • 16.0 mm
      • 16.1 mm
      • 16.4 mm
      • 17.3 mm
      • 17.5 mm
      • 17.8 mm
      • 18.0 mm
      • 18.5 mm
      • 19.7 mm
      • 19.9 mm
      • 21.1 mm
      • 21.4 mm
      • 22.3 mm
      • 23.6 mm
      • 26.2 mm
      • 28.8 mm
    • Core insulation base material
      • Thermoplastic elastomers
    • Base material of outer sheath
      • Polyurethane
    • Cable sheath colour
      • anthracite
      • black
    • Core identification
      • Numbers
      • Colours
  • Product features
    • Characteristics
      • Chemical resistant
      • Flame-retardant
      • For continuous flexing
      • For torsional load
      • Low-adhesion sheath surface
      • Oil-resistant
      • PWIS-free
      • UV-resistant
      • weather resistant
    • Application area
      • Flexible
      • Torsion
      • Cable chain
    • Minimum bending radius in mm, stationary
      • 24.8 mm
      • 26.4 mm
      • 36.4 mm
      • 44.8 mm
      • 20.8 mm
      • 26.8 mm
      • 37.2 mm
      • 40.8 mm
      • 52.8 mm
      • 53.2 mm
      • 61.6 mm
      • 18.4 mm
      • 19.2 mm
      • 20.0 mm
      • 21.6 mm
      • 22.8 mm
      • 25.2 mm
      • 26.0 mm
      • 28.0 mm
      • 28.8 mm
      • 32.0 mm
      • 32.8 mm
      • 35.2 mm
      • 36.0 mm
      • 36.8 mm
      • 37.6 mm
      • 40.4 mm
      • 41.2 mm
      • 42.0 mm
      • 42.4 mm
      • 44.0 mm
      • 44.4 mm
      • 46.0 mm
      • 48.0 mm
      • 49.2 mm
      • 49.6 mm
      • 50.0 mm
      • 52.4 mm
      • 55.2 mm
      • 56.0 mm
      • 57.2 mm
      • 60.8 mm
      • 63.2 mm
      • 64.0 mm
      • 64.4 mm
      • 65.6 mm
      • 69.2 mm
      • 70.0 mm
      • 71.2 mm
      • 72.0 mm
      • 74.0 mm
      • 78.8 mm
      • 79.6 mm
      • 84.4 mm
      • 85.6 mm
      • 89.2 mm
      • 94.4 mm
      • 104.8 mm
      • 115.2 mm
    • Minimum bending radius in mm, dynamic continuously flexing
      • 93.0 mm
      • 52.0 mm
      • 66.0 mm
      • 91.0 mm
      • 105.0 mm
      • 139.5 mm
      • 154.0 mm
      • 168.0 mm
      • 46.0 mm
      • 48.0 mm
      • 54.0 mm
      • 63.0 mm
      • 67.0 mm
      • 72.0 mm
      • 75.0 mm
      • 80.0 mm
      • 82.0 mm
      • 85.5 mm
      • 88.0 mm
      • 90.0 mm
      • 92.0 mm
      • 94.0 mm
      • 97.5 mm
      • 99.0 mm
      • 100.5 mm
      • 102.0 mm
      • 103.0 mm
      • 106.0 mm
      • 110.0 mm
      • 112.0 mm
      • 120.0 mm
      • 123.0 mm
      • 124.0 mm
      • 125.0 mm
      • 131.0 mm
      • 132.0 mm
      • 133.0 mm
      • 136.5 mm
      • 138.0 mm
      • 143.0 mm
      • 151.5 mm
      • 152.0 mm
      • 153.0 mm
      • 161.0 mm
      • 166.5 mm
      • 172.5 mm
      • 175.0 mm
      • 178.0 mm
      • 180.0 mm
      • 185.0 mm
      • 197.0 mm
      • 198.0 mm
      • 199.5 mm
      • 210.0 mm
      • 211.0 mm
      • 236.0 mm
      • 237.0 mm
      • 240.0 mm
      • 246.0 mm
      • 259.5 mm
      • 298.5 mm
      • 321.0 mm
      • 334.5 mm
      • 393.0 mm
      • 432.0 mm
    • Minimum bending radius in mm, occasionally flexing
      • 93.0 mm
      • 52.0 mm
      • 66.0 mm
      • 91.0 mm
      • 105.0 mm
      • 139.5 mm
      • 154.0 mm
      • 168.0 mm
      • 46.0 mm
      • 48.0 mm
      • 54.0 mm
      • 63.0 mm
      • 67.0 mm
      • 72.0 mm
      • 75.0 mm
      • 80.0 mm
      • 82.0 mm
      • 85.5 mm
      • 88.0 mm
      • 90.0 mm
      • 92.0 mm
      • 94.0 mm
      • 97.5 mm
      • 99.0 mm
      • 100.5 mm
      • 102.0 mm
      • 103.0 mm
      • 106.0 mm
      • 110.0 mm
      • 112.0 mm
      • 120.0 mm
      • 123.0 mm
      • 124.0 mm
      • 125.0 mm
      • 131.0 mm
      • 132.0 mm
      • 133.0 mm
      • 136.5 mm
      • 138.0 mm
      • 143.0 mm
      • 151.5 mm
      • 152.0 mm
      • 153.0 mm
      • 161.0 mm
      • 166.5 mm
      • 172.5 mm
      • 175.0 mm
      • 178.0 mm
      • 180.0 mm
      • 185.0 mm
      • 197.0 mm
      • 198.0 mm
      • 199.5 mm
      • 210.0 mm
      • 211.0 mm
      • 236.0 mm
      • 237.0 mm
      • 240.0 mm
      • 246.0 mm
      • 259.5 mm
      • 298.5 mm
      • 321.0 mm
      • 334.5 mm
      • 393.0 mm
      • 432.0 mm
    • Torsion
      • for +/- 360 °/m and min. -40 °C up to 10000000 Torsion cycles
      • for +/- 360 °/m and min. -40 °C up to 5000000 Torsion cycles
      • for +/- 180 °/m and min. -40 °C up to 10000000 Torsion cycles
      • for +/- 180 °/m and min. -40 °C up to 5000000 Torsion cycles
    • Temperature, fixed installation
      • to 80 °C according to CSA AWM
      • to 80 °C according to UL AWM
      • -50 °C to 80 °C according to IEC
      • -50 °C to 80 °C
    • Temperature, occasionally moved
      • to 80 °C according to CSA AWM
      • to 80 °C according to UL AWM
      • -40 °C to 80 °C according to IEC
      • -40 °C to 80 °C
    • Temperature, dynamic continuously flexing
      • to 80 °C according to CSA AWM
      • to 80 °C according to UL AWM
      • -40 °C to 80 °C according to IEC
      • -40 °C to 80 °C
  • Certifications and standards
    • Certificates
      • CE marked
      • UL recognised
      • cUR recognized
    • EAC certified
      • Yes

Results

(4)