- Easy unwinding straight from the box
- Space-saving at the usage site owing to the stackability
- Product protection
- Manual transport possible thanks to carrier handles
- Easy disposal
- Dispenser solution (reusable) possible
Logistics products
Our transport, storage and unwinding solutions enable efficient and ergonomic handling.
Paper drum container
Portable cardboard box with unwinding and storage option
Perhaps you do not have a drum rack and are looking for a flexible alternative for unwinding? LAPP offers a cost-effective and flexible solution!
With our cable drum cardboard box, you can unwind our LAPP drums with 40 cm flange diameter effortlessly. Ideal for manual transport, the cardboard boxes can be stacked on site or integrated into a compartment floor rack.
Cable drum pallet
Transport aids with unwinding function
Do you need a transport aid with a direct unwinding function? With our cable drum pallet, drums up to a flange diameter of 90 cm can be unwound directly from the load carrier.
Our cable drum pallet is an ideal transport and storage option, which is also suitable for export due to its IPPC treatment.
- Four-way entry
- Drum can be unwound directly from the load carrier
- No need to move the drum, thus reducing any risk of damage
- Reusable
- Suitable for export, due to IPPC treatment
Champion
Portable and flexibly adjustable drum dispenser
The Champion is our lightweight solution for unwinding drums. It can easily roll small coils from 15 cm or cable drums with up to 90 cm flange diameter. The special design makes the LAPP Champion particularly lightweight, while still ensuring a safe and stable stand on various surfaces.
The drum unwinder is available in two different models – Champion 52 or Champion 67. Depending on the model, the product is suitable for different drum widths up to a maximum of 52 or 67 cm.
- Universal drum unwinder in lightweight design
- Reliable stability thanks to rubber feet and transportability owing to steering pulleys
- Easy adjustable supporting rollers with six different positions
- Load-bearing capacity up to 200 kg
- Weather-resistant due to the use of high-quality stainless materials
Customised rack solution
Customised drum and ring rack systems
Our rack systems can be individually planned to adapt flexibly to all requirements, and subsequently expanded as needed. They are an ideal storage option and allow items from the rack to be used directly.
- Clean and clear storage of all articles
- Low setup times
- Cables can be bundled from the rack
- Easy removal option
Plastic drum
Drums for hygienically demanding applications
Do you need to meet certain hygiene requirements? On request, you can also receive our cables and wires for a surcharge on environmentally friendly recycled plastic drums, which you can use in clean rooms.
- Suitable for use in clean rooms
- Made of polypropylene
- High stability despite low net weight
- Suitable for export
- Selectable drum sizes are the same as the LAPP standard plywood drums
Lamiflex casing
Smart drum casing for maritime transport
Do you need a packaging solution suitable for sea freight? We can offer you the cost-effective Lamiflex casing as a simple and time-saving alternative to wooden board casing. This effectively protects the cable from influences during sea transport.
- Reduces damage to the drum flanges by affixing the casing with adhesive tape.
- UV-stable drum casing with a perfect fit between the cable drum flanges (without cavities)
- Effectively protects the cable against damage (shock resistance up to 100 kg/cm³)
- Resistant against insects and sea water
- Reduces the risk of injuries (no nails or wooden splinters)
Multi-chamber drum
Installation of several cables and stranding on site
The individually configurable, fee-based multi-chamber drum can be used to perform stranding directly on your construction site. The multi-chamber drum enables several cables to be inserted simultaneously at your location.
- Transport cost reduction
- Simultaneous installation of several cables at the installation site
- Simplified processes on-site
- Complex stranding of several lines is not necessary
Systems for single cores
Mobile transport, organisation and cutting system
Do you need a mobile transport, organisation and cutting system for your single cores? LAPP provides the solution! There are two basic systems available for the LAPP single core rings: the TRONIC box or the TRONIC module with different trolleys and single core capacities. Optionally, measuring devices with a cutting device can also be selected for both systems. With the TRONIC S12 single core trolley, we also have a transport, organisation and cutting solution ready for you for the LAPP single core coils.
- Simplifies handling with single core rings and coils
- Clean and clear storage
- Direct material removal from a wide range of articles at the application site
- Fast and effective assembly processes with short setup times
- Storage and unwinding suitable for cables (without twisting or kinking)
Transport rack
Transport and storage of standing drums
For quality, safety and handling reasons, large drums are transported on specially designed (IPPC standardised) wooden frames. Transport frames are provided free of charge for large drums with a flange diameter of 140 cm and above.
- Four-way entry
- Secure stand even on poor terrain (construction site)
- Suitable for export according to IPPC standard
Drum trolley
Mobile transport, ordering and cutting trolley
Do you need a mobile unwinding and storage option for several drums? LAPP provides the solution! The drum trolley can be individually equipped with eight drums and, if needed, expanded to include four coil axes. This means that drums with flange diameters between 40 and 50 cm and a total load of up to 400 kg can be conveniently transported to the usage site.
- Clear storage and direct use of the drums
- Easy and fast removal of individual cables
- Low setup times
- Cable bundling from drum trolley possible