Cables/wires for robots and torsion

With these power and control cables, your gantry robots and articulated robots are perfectly equipped for impressive performance. They are designed for simultaneous bending and twisting with torsion angles of up to +/- 360°. The cables are available in shielded and unshielded variants and optionally with UL/CSA certification for North America.

Categories

Categories

Cables and wires

Power and control cables

Show all

Robots and torsion

• Robotic cable

• Automotive
• Machine Tools
• Robotics
• Lifts & Elevators
• Packaging
• Healthcare & Pharma
• Agricultural & Farm Machinery
• Assembly Machines
• Construction Machinery
• Food & Beverage
• Intralogistics & Material handling

• 4
• 25
• 3
• 18
• 12
• 7
• 2
• 14
• 16
• 23
• 34
• 41
• 5

• 1.0 mm²
• 0.34 mm²
• 1.5 mm²
• 0.25 mm²
• 0.5 mm²
• 2.5 mm²
• 0.14 mm²
• 0.75 mm²
• 6.0 mm²
• 16.0 mm²
• 25.0 mm²
• 35.0 mm²

• Chemical resistant
• Flame-retardant
• For permanent bending
• For torsional load
• Oil resistant
• PWIS-free
• UV-resistant
• weather resistant
• Low-adhesive jacket surface

• CE marking
• UL recognized
• cUR recognized

Show more filters

Filter

Filter

Reset everything

• General information
  • End of sales article
    • No
  • lappDisplayNewIcon
    • No
  • Product type
    • Robotic cable
  • Industry segment
    • Automotive
    • Machine Tools
    • Robotics
    • Lifts & Elevators
    • Packaging
    • Healthcare & Pharma
    • Agricultural & Farm Machinery
    • Assembly Machines
    • Construction Machinery
    • Food & Beverage
    • Intralogistics & Material handling
• Electrical parameters
  • Nominal voltage
    • U₀/U: 300/500 V AC rms according to IEC
    • 48 V AC rms according to IEC
  • Rated voltage
    • 600 V AC rms according to UL AWM
    • 600 V AC rms according to cRU AWM
    • 1000 V AC rms according to UL AWM
    • 1000 V AC rms according to cRU AWM
  • test voltage
    • 3 kV
    • 2 kV
    • 1.5 kV
• Product design
  • Nominal cross section conductor (AWG)
    • 10 AWG
    • 14 AWG
    • 16 AWG
    • 18 AWG
    • 21 AWG
    • 22 AWG
    • 24 AWG
  • Including protective ground
    • Yes
    • No
  • Shielded
    • No
    • Yes
  • Nominal outer diameter
    • 0.244 in
    • 0.26 in
    • 0.358 in
    • 0.441 in
    • 0.205 in
    • 0.264 in
    • 0.366 in
    • 0.402 in
    • 0.52 in
    • 0.524 in
    • 0.606 in
    • 0.181 in
    • 0.189 in
    • 0.213 in
    • 0.224 in
    • 0.248 in
    • 0.256 in
    • 0.276 in
    • 0.283 in
    • 0.315 in
    • 0.323 in
    • 0.346 in
    • 0.354 in
    • 0.362 in
    • 0.37 in
    • 0.398 in
    • 0.413 in
    • 0.417 in
    • 0.433 in
    • 0.437 in
    • 0.453 in
    • 0.472 in
    • 0.484 in
    • 0.488 in
    • 0.492 in
    • 0.516 in
    • 0.543 in
    • 0.551 in
    • 0.563 in
    • 0.598 in
    • 0.622 in
    • 0.63 in
    • 0.634 in
    • 0.646 in
    • 0.681 in
    • 0.689 in
    • 0.701 in
    • 0.709 in
    • 0.728 in
    • 0.776 in
    • 0.783 in
    • 0.831 in
    • 0.843 in
    • 0.878 in
    • 0.929 in
    • 1.031 in
    • 1.134 in
  • Core insulation base material
    • Thermoplastic elastomers
  • Basic material of outer jacket
    • Polyurethane
  • Outer jacket color
    • anthracite
    • black
  • Core identification
    • Numbers
    • Colors
  • Number of cores
    • 4
    • 25
    • 3
    • 18
    • 12
    • 7
    • 2
    • 14
    • 16
    • 23
    • 34
    • 41
    • 5
  • Nominal conductor cross-section (metric)
    • 1.0 mm²
    • 0.34 mm²
    • 1.5 mm²
    • 0.25 mm²
    • 0.5 mm²
    • 2.5 mm²
    • 0.14 mm²
    • 0.75 mm²
    • 6.0 mm²
    • 16.0 mm²
    • 25.0 mm²
    • 35.0 mm²
• Product features
  • Application area
    • Flexible
    • Torsion
    • Cable chain
  • Minimum bending radius in inch, fixed installation
    • 0.976 in
    • 1.039 in
    • 1.433 in
    • 1.764 in
    • 0.819 in
    • 1.055 in
    • 1.465 in
    • 1.606 in
    • 2.079 in
    • 2.094 in
    • 2.425 in
    • 0.724 in
    • 0.756 in
    • 0.85 in
    • 0.898 in
    • 0.992 in
    • 1.024 in
    • 1.102 in
    • 1.134 in
    • 1.26 in
    • 1.291 in
    • 1.386 in
    • 1.417 in
    • 1.449 in
    • 1.48 in
    • 1.591 in
    • 1.654 in
    • 1.669 in
    • 1.732 in
    • 1.748 in
    • 1.811 in
    • 1.89 in
    • 1.937 in
    • 1.953 in
    • 1.969 in
    • 2.063 in
    • 2.173 in
    • 2.205 in
    • 2.252 in
    • 2.394 in
    • 2.488 in
    • 2.52 in
    • 2.535 in
    • 2.583 in
    • 2.724 in
    • 2.756 in
    • 2.803 in
    • 2.835 in
    • 2.913 in
    • 3.102 in
    • 3.134 in
    • 3.323 in
    • 3.37 in
    • 3.512 in
    • 3.717 in
    • 4.126 in
    • 4.535 in
  • Minimum bending radius in inch, dynamic continuously flexing
    • 3.661 in
    • 2.047 in
    • 2.598 in
    • 3.583 in
    • 4.134 in
    • 5.492 in
    • 6.063 in
    • 6.614 in
    • 1.811 in
    • 1.89 in
    • 2.126 in
    • 2.48 in
    • 2.638 in
    • 2.835 in
    • 3.15 in
    • 3.228 in
    • 3.366 in
    • 3.465 in
    • 3.543 in
    • 3.622 in
    • 3.701 in
    • 3.839 in
    • 3.898 in
    • 3.957 in
    • 4.016 in
    • 4.173 in
    • 4.331 in
    • 4.409 in
    • 4.724 in
    • 4.843 in
    • 4.882 in
    • 4.921 in
    • 5.157 in
    • 5.197 in
    • 5.236 in
    • 5.374 in
    • 5.433 in
    • 5.63 in
    • 5.965 in
    • 5.984 in
    • 6.024 in
    • 6.339 in
    • 6.555 in
    • 6.791 in
    • 6.89 in
    • 7.008 in
    • 7.087 in
    • 7.283 in
    • 7.756 in
    • 7.795 in
    • 7.854 in
    • 8.268 in
    • 8.307 in
    • 9.291 in
    • 9.331 in
    • 9.449 in
    • 9.685 in
    • 10.217 in
    • 11.752 in
    • 12.638 in
    • 13.169 in
    • 15.472 in
    • 17.008 in
  • Minimum bending radius in inch, occasionally flexing
    • 3.661 in
    • 2.047 in
    • 2.598 in
    • 3.583 in
    • 4.134 in
    • 5.492 in
    • 6.063 in
    • 6.614 in
    • 1.811 in
    • 1.89 in
    • 2.126 in
    • 2.48 in
    • 2.638 in
    • 2.835 in
    • 3.15 in
    • 3.228 in
    • 3.366 in
    • 3.465 in
    • 3.543 in
    • 3.622 in
    • 3.701 in
    • 3.839 in
    • 3.898 in
    • 3.957 in
    • 4.016 in
    • 4.173 in
    • 4.331 in
    • 4.409 in
    • 4.724 in
    • 4.843 in
    • 4.882 in
    • 4.921 in
    • 5.157 in
    • 5.197 in
    • 5.236 in
    • 5.374 in
    • 5.433 in
    • 5.63 in
    • 5.965 in
    • 5.984 in
    • 6.024 in
    • 6.339 in
    • 6.555 in
    • 6.791 in
    • 6.89 in
    • 7.008 in
    • 7.087 in
    • 7.283 in
    • 7.756 in
    • 7.795 in
    • 7.854 in
    • 8.268 in
    • 8.307 in
    • 9.291 in
    • 9.331 in
    • 9.449 in
    • 9.685 in
    • 10.217 in
    • 11.752 in
    • 12.638 in
    • 13.169 in
    • 15.472 in
    • 17.008 in
  • Torsion
    • For +/- 360 °/m and min. -40 °C up to 10000000 Torsion cycles
    • For +/- 360 °/m and min. -40 °C up to 5000000 Torsion cycles
    • For +/- 180 °/m and min. -40 °C up to 10000000 Torsion cycles
    • For +/- 180 °/m and min. -40 °C up to 5000000 Torsion cycles
  • Temperature, fixed installation
    —
  • Temperature, occasionally moved
    —
  • Temperature, dynamic continuously flexing
    —
  • Product features
    • Chemical resistant
    • Flame-retardant
    • For permanent bending
    • For torsional load
    • Oil resistant
    • PWIS-free
    • UV-resistant
    • weather resistant
    • Low-adhesive jacket surface
• Certifications and standards
  • EAC certified
    • Yes
  • Certifications
    • CE marking
    • UL recognized
    • cUR recognized

Show results (4)

Results

(4)

Sort by

Relevance

Relevance Name (ascending) Name (descending)

23 Article

Login for price

Show all articles

6 Article

Login for price

Show all articles

32 Article

Login for price

Show all articles

11 Article

Login for price

Show all articles